Phil & Teds LATCH BASE, Инструкция по эксплуатации

Страница: 16 / 40

Instructions
LATCH Location
LATCH stands for Lower Anchors and Tethers for
Children.
It makes installation easier without using the
vehicle’s seat belts. LATCH is a way to secure your
infant car seat to your vehicle by using the LATCH
connectors on your infant car seat LATCH base. These
connectors attach to the lower anchor points in
certain vehicle seating positions.
The infant car seat LATCH base is designed to be
used at the standard spacing of 11” from the center
of one anchor point to the center of another anchor
point. Please refer to your vehicle owner’s manual
for information about using LATCH in certain seating
positions.
If there are lower anchor points available in the rear
passenger seat they must be used when in conjunction
with the base.
LATCH may be used for spacing larger than 11” ONLY if
your vehicle manufacturer allows it.
If your vehicle does not have lower anchor points you
can still install your infant car seat with the vehicle’s belt
system. Take the time to read these instructions carefully.
11”
11”