Instructions
Instructions
Detaching the Car Seat from the ISOFIX Base
•
Push the shell release button to the left, at the same
time pull the shell release button handle indicator,
then you can move out the shell.
Carefully lift the car seat from the ISOFIX Base.
Removing the ISOFIX Base from the vehicle
•
Push the ISOFIX adjustment button, and the ISOFIX
connector arms will pop-up automatically, then the
base of ISOFIX can move out from the seat of car.
Pushing the support leg adjustment button to adjust
the front support leg to the required length. Reattach
to the holder position under the base. Carefully
remove the base from your vehicle.
1 2 3 4 5
6 7 8
8 7 6 5 4 3 2
1
a
b
a
b
1 2 3 4 5 6
7 8
6 7 8
•
Push the support leg adjuster and adjust the support
leg so that it makes full and firm contact with the
vehicle floor. The two pressure monitors at the
base of the support leg must turn from red to green
confirming firm contact. Check that the front support
leg clicks into position and is correctly adjusted.
Lower the car seat on to the ISOFIX Base and make
sure that all 4 connection bars engage firmly and click
into position on the base connection points Make
sure the car seat handle is in the upright position and
that it “clicks” into place.
Lift the car seat to make sure that all four connections
have engaged correctly and the three connection
indicators have changed from red to green(parts list
no.5/6/9)
Do not place the front support leg on a floor storage compartment
lid. The front support leg MUST make full and firm contact with the
vehicle floor.
Make sure that the support leg does not raise the base from the
surface of the vehicle seat.
7
10
7
10
8
11
8
11
9
12
9
12
EN
13
