6
3051_1_Product_Manual - November 1, 2010
Double Click on
1.
Phidget
InterfaceKit 8/8/8
in the
Phidget Control Panel to bring up
InterfaceKit-full and check that the
box labelled Attached contains the
word True.
Click on the Digital Out box. A tick
2.
mark appears in the box and the
bulb lights up. Click on the box
again. The tick mark goes away and
light goes out. If you unplug the
Dual Relay Board while the light is
on, it will go off. Move the bulb wire
from NO to NC (Normally Closed).
Now the light is on when there is no
tick mark and off when there is. If
you unplug the Dual Relay Board when the light is on, it will stay on.
The bottom row of the digital out shows the status of the request, while the top row displays the status of the
3.
digital output as reported by the 3051 Relay.
1
3
2
Double Click on the
icon to activate the
Phidget Control Panel and make sure that the
Phidget InterfaceKit 8/8/8
is properly
attached to your PC.
Testing Using Mac OS X
Click on System Preferences >> Phidgets (under Other) to activate the Preference Pane
•
Make sure that the Phidget InterfaceKit 8/8/8 is properly attached.
•
Double Click on Phidget InterfaceKit 8/8/8 in the Phidget Preference Pane to bring up the InterfaceKit-Full
•
example. This example will function in a similar way as the Windows version, but note that it does not include an
Advanced Sensor Display.
