1103_0_Product_Manual created: 08/14/09
Page 6
Analog Input Cable Connectors
Each Analog Input uses a 3-pin, 0.100 inch pitch locking
connector. Pictured here is a plug with the connections
labeled. The connectors are commonly available - refer to
the Table below for manufacturer part numbers.
Cable Connectors
Manufacturer
Part Number
Description
Molex
50-57-9403
3 Position Cable Connector
Molex
16-02-0102
Wire Crimp Insert for Cable Connector
Molex
70543-0002
3 Position Vertical PCB Connector
Molex
70553-0002
3 Position Right-Angle PCB Connector (Gold)
Molex
70553-0037
3 Position Right-Angle PCB Connector (Tin)
Molex
15-91-2035
3 Position Right-Angle PCB Connector - Surface Mount
Note: Most of the above components can be bought at
www.digikey.com
Mechanical Drawing
1:1 scale
Note:
When printing the mechanical drawing, “
Page Scaling
” in the Print panel must be set
to “
None
” to avoid re-sizing the image.
