1102 User Guide
1
1102 User Guide
Go to this device's product page [1]
Getting Started
Checking the Contents
You should have received:
•
An IR Reflective Sensor 5mm
•
A Sensor Cable
In order to test your new Phidget you will also need:
•
A PhidgetInterfaceKit 8/8/8
•
A USB Cable
•
A reflective surface of some kind (just about anything will do).
Connecting the Pieces
1. Connect the IR Reflective Sensor 5mm to theAnalog Input 6 on the PhidgetInterfaceKit 8/8/8 board using the
sensor cable.
2. Connect the PhidgetInterfaceKit to your PC using the USB cable.
Testing Using Windows 2000 / XP / Vista / 7
Make sure you have the current version of the Phidget library installed on your PC. If you don't, follow these steps:
1. Go to the Quick Downloads section on the Windows page
2. Download and run the Phidget21 Installer (32-bit, or 64-bit, depending on your system)
3. You should see the icon on the right hand corner of the Task Bar.
Running Phidgets Sample Program
Double clicking on the icon loads the Phidget Control Panel; we will use this program to ensure that your new
Phidget works properly.
The source code for the
InterfaceKit-full
sample program can be found in the quick downloads section on the C#
Language Page. If you'd like to see examples in other languages, you can visit our Languages page.
