300Mbps Wireless N Router
www.phicomm.com
24
Chapter 3: Router Configuration
MAC address table or select one from the scanning table. At the same time, the connecting
device should be in Lazy, Repeater or Bridge mode.
Repeater Mode: You can select the mode to extend the distance between the two WLAN
devices. Functioning as a WDS repeater, the connects to both a client card as an AP and to
another AP. In typical repeater applications, APs connecting to other APs equipped with WDS
functionality must also support WDS. In this mode, you need to add the MAC address of the
connecting device into the Routers AP MAC address table and the connecting client should be in
Lazy, Repeater or client mode.
Encryption Type: You can select WEP 64bits mode, WEP 128bits mode TKIP mode, AES mode for
security here.
Encryption key: Enter the key, the key format is decided by the encryption method you
selected.
Wireless Access Node MAC Address: Input the MAC address of the other wireless router.
Note
:
Two wireless routers must use the same channel, encryption type and encryption key.
DHCP Server
There are three submenus under the DHCP menu: DHCP, DHCP Clients List and Address
Reservation. Click any of them, and you will be able to configure the corresponding function.
DHCP
If you enable DHCP server of the router, the DHCP server automatically configures the TCP/IP
protocol for each computer in the LAN.
DHCP Server: If you disable the server, please make sure you have another DHCP server in your
network.
Start IP Address: The first address in the IP Address pool.
