Figure 4
Figure 5
Figure 3
max
Before lighting the fire bowl
The fuel can is empty, it is recommended to fill bio-ethanol into the can on the initial use. After the fuel is used up, the fuel can can be
filled or refueled with bio-ethanol or gel fuel after it is cooled COMPLETELY.
Lighting the fire bowl
Use a long match or extended butane lighter to ignite fuel. If the fire bowl cannot ignite, repeat the step (See Figure 4).
Extinguishing the fire bowl
Place the extinguishing cover onto glass shield until NO flames are present (See Figure 5).
OPERATION INSTRUCTIONS
4
NOTE:
DO NOT exceed the "max" volume level while refueling the fuel can (see Figure 3).
NOTE:
(1). Each can burns approx. 1.5 hours.
(2). On the initial use, flames are short. Keep burning 5 minutes, flames will reach out to a desirable height.
(3). During the initial burn, you may smell a slight odor. The odor is temporary and will be absent on following burns.
(4). Do not use the short butane lighter to ignite the unit to prevent from the scalding.
(5). During the burning, the outer wall of fire bowl and glass shield will become extremely HOT. DO NOT touch or move the
unit, DO NOT change the cans. Wait 30 minutes until it’s cooled COMPLETELY.
NOTE:
(1). DO NOT blow out the flames using mouth or electrical fan.
(2). DO NOT douse the flames using the water.
(3). After the burning, the outer wall of fire bowl and glass shield is still extremely HOT. DO NOT touch or move the unit, DO
NOT change the cans. Wait 30 minute until it’s cooled COMPLETELY.
extinguishing cover
LIFE GETS BETTER WITH PHI VILLA
