9
Operating Instructions
Once the electric heater has been properly installed and connected to a ground
electrical outlet, it is ready to operate.
Notes:
Ensure the circuit breakers for the power supply are turned on.
This machine uses remote control and touch screen to control the work of the
product.
During remote control and touch operation, the buzzer will beep once for each
effective operation.
The backlight of the touch screen is off, and the first operation of remote control or
touch is only to wake up the system, and the machine can be operated effectively
in the system wake-up state.
The temperature setting of this machine can only be adjusted between 50→77
Fahrenheit, and the whole process can be heated according to the user's set
temperature.
Main power switch:
The power switch on the upper part of the machine is
closed, the buzzer beeps, and the backlight of the touch screen lights up once,
and the system enters the standby state; the switch is opened, that is, the main
power supply is cut off.
Operation with touch Screen Control Panel
Standby key: Touch once, the machine enters the running state, and the
flame lamp starts to run. Touch again to turn off the operation and enter the
standby state.
Timing key: set the working time of the machine, touch this key, the screen
displays
"1H"→2H"→"3H"→"4H"→"5H"→"6H"→"0H" in turn, and "1H"
means timing work Shut down after 1 hour, up to 6 hours timing; turn on timing, the
backlight is always on.
Flame key: When the machine is a multi-color flame, touch this key to adjust
the flame color. There are
10 types
of frame color which consists of
orange
→
red
→
green
→
blue
→
red&green
→
red-blue
→
blue-green
→
red-orange
→
green Orange
→
blue-orange
