background image

used as a drying rack for clothing. Do not hand any decorations on the heater.

14)Do not modify this heater. Use this heater only as described in this manual. Any

other use not recommended by the manufacturer may cause fire, electric shock, or

injury to persons.

15)Avoid the use of an extension cord because the extension cord may overheat and

cause a risk of fire. However, if you have to use an extension cord, the cord shall

be No.16AWG minimum size and rated not less than 1875 watts, and 3-wire cord

with grounding type plug and cord connector.

16)Do not plug this product into a receptacle controlled by a wall switch or dimmer.

17)Always use a certified electrician should new circuits or outlets be required.

18)Always disconnect power before performing any cleaning, maintenance or

relocation of the heater.

19)For off-season storage, keep in a dry place.

NOTE

: Procedures and techniques that are considered important enough to

emphasize.

CAUTION

: Procedures and techniques, which, if not carefully followed, will result in

damage to the equipment or personal property or may cause personal injury.

WARNING

: Procedures and techniques, which, if not carefully followed, will expose

the user to the risk of serious injury, illness or death.

WARNING

:

This heater and parts become hot when in use. The area directly around and under

the heater must be clear and free of any obstructions.

DO NOT ALLOW CHILDREN TO OPERATE THIS HEATER. KEEP CHILDREN AND

PETS AWAY FROM HEATER AND CONTROLS.

Electrical Parameter

Power supply: 120V AC

Frequency: 60Hz

Power: 750W / 1500W

NOTE:

If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent or similarly qualified persons in order to avoid a hazard.

Содержание AH-FP-28FC














Отзывы: