PheeNet MJCAS-310PTD, Руководство пользователя

Страница: 84 / 94

MJPEG IP Camera User’s Guide
84/94
Appendix D: PING IP Address
The PING (stands for Packet Internet Groper) command is used to detect whether a
specific IP address is accessible by sending a packet to the specific address and waiting
for a reply. It’s also a very useful tool to confirm MJPEG IP Camera installed or if the IP
address conflicts with any other devices over the network.
If you want to make sure the IP address of MJPEG IP Camera, utilize the PING
command as follows:
z Start a DOS window.
z Type ping x.x.x.x, where x.x.x.x is the IP address of the MJPEG IP Camera.
The replies, as illustrated below, will provide an explanation to the problem.
If you want to detect any other devices conflicts with the IP address of MJPEG IP
Camera, also can utilize the PING command but you must disconnect the MJPEG IP
Camera from the network first.