SIP IP Phone User Manual
41
12. [sysconf] command
1.
-print:
display all current configurations.
2.
-idtime:
set the duration(in second) of two pressed digits in dial mode as timed out.
If after the duration user hasn’t pressed next number, SIP-Phone will dial out all
number pressed.
3.
-keypad:
set DTMF type .User can select DTMF type SIP-Phone receive and
transmit.(
sysconf –keypad 0/1 ,
0 for in band ,1 for RFC2833.)
4.
-2833type:
change RFC2833 Payload type.
5.
-eod
: select end of dialing key, e.g. set end of dial key as “
＊
” button , after finished
pressing dialing number then press “
＊
” will dial out. (
sysconf –eod 0/1/2
, 0 for no
end of dial key , 1 for “
＊
” button, 2 for “
#
” button )
6.
–privacy
: this function can only work in Japan and also user’s service platform
supports Japan standard telecom CLIR specification. When this function is set as
Japan mode, other users can hide their caller ID by press special code before dial
out phone number.
13. [sip] command
1. –print:
display all current configurations.
2. –mode
: configure SIP IP Phone (IPP-120) as Proxy or Peer-to-Peer Mode.
Usage:
sip –mode 0/1
(1 for Proxy mode, 0 for Peer-to-Peer mode)
3. –px
: set proxy server IP address or URL address (
sip –px “IP address or URL of
Proxy server”
).
