3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
SERVICE
POWER
SYNC
EDID
DC 5V
OUTPUT 1
INPUT
STD
TV
1
2
3
4 5 6 7
1
SERVICE:
Manufacturer use only.
2
HDMI OUTPUT 1:
Connect each of the output ports to the HDMI
display for simultaneous HDMI distribution.
3
HDMI INPUT:
Connect the input port to the HDMI or DVI output of
your source equipment such as DVD player or set-top box with an
HDMI cable.
4
EDID STD/TV:
The default factory setting is TV, when in this mode,
the unit will detect the first HDMI output device's EDID settings and
record them in the unit's memory. If there are any audio or video
issues then switch the unit to STD (Standard) mode and power
cycle it, the unit will be configured as standard stereo (PCM) Audio
and initiate a search for a common compatible video resolution.
5
SYNC LED:
The LED will illuminate when the HDMI source signal is
connected to the input port.
6
POWER LED:
The LED will illuminate when the unit is powered.
7
DC 5V:
Connect the 5V DC power supply into the splitter and Plug
the adaptor to AC wall outlet.
6.2 Rear Panel
OUTPUT 2
OUTPUT 3
OUTPUT 4
CPRO-4E 4KX2K 1X4 SPLITTER
1
1
HDMI OUTPUTS 2/3/4:
Connect each of the output ports to an HDMI
display for simultaneous HDMI distribution.
