PhD Solutions MXC-424-HDTL, Руководство по эксплуатации

Страница: 6 / 21

2 2
4. SYSTEM REQUIREMENTS
• Input source equipments with HDMI connection cables
• Industry CAT5e/6/7 cable.
•
HDMI over CAT5e/6/7 receivers with industrial CAT5e/6/7 cables
• Output displays or audio receiver equipments with HDMI
connection cables.
5. FEATURES
• HDMI, HDCP1.1 and DVI compliant
• Supports HDMI 3D features
• Supports resolutions to VGA ~ WUXGA and 480i~1080p follow by
output display’s EDID settings
• Supports extension up to 60 meters through CAT5e/6/7
• Supports 3D signal display follow by display TV’s EDID
•
Supports simultaneous HDMI output display on A and C CAT5e/6/7
output
• Supports HDMI input up to 15 meters with 8bits resolution or 10
meters with 12bits resolution
• Supports IR in/out from input and output locations
• Supports RS-232 (include Telnet), remote control and on panel
controls
• 1U size design
• Supports external and internal EDID setting
• Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio transmission
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
OUT A 1 B 2
C 3 D 4 IN
POWER LOCK MENU
CMSI-424L
4X4 HDMI MATRIX
1 2 3 4 5 6
1
LCM: This monitor displays your setting information with each input
and output selection.
2 IR: This IR window accepts the remote control signal of this device
only.
3
Power button LED: Press this button to turn on the device and the
green LED will illuminate when the power is on. When the LED
illuminate in red it is in standby mode
4 LOCK: Press this button to lock all the buttons on the panel and the
LED will illuminate. To unlock, just press it again.
5 Menu: Press this button once to select EDID setting from STD
(internal) 1 or TV (external) 2 then press it again to confi rm the
selection. Press this button every to confi rm the selection.
6
1 ~4 /A ~ D & OUT/IN button: Press OUT/IN button fi rst to select the
output/input then press the number button to make the selection
accordingly. For example, output A ~ B wish to select input 1 and
C ~ D wish to select input 2. Press Out →A→B →In→1→Menu, and
then press Out →C→D→In→2→Menu. If the menu button is not
press the selection will not be changed.