5
5
6.3. IR Cable Pin Assignment
3
1
2
3
1
2
Power 5 V
IR Blaster Signal
NC
IR Signal
Power 5 V
Grounding
IR Receiver
IR Blaster
6.4. D-Sub 9 Pin Defi nitions
Pin
Defi ne TX / RX
1
N/C
2
TxD / RxD
3
RxD / TxD
4
N/C
5
GND
6
N/C
7
N/C
8
N/C
9
N/C
4
6.2 Receiver Front and Rear Panels
RS-232 Out
LAN
HDMI Out
CAT5e/6 to HDMI with LAN/IR/RS232
Receiver
Rear
Front
CAT5e/6 In
Link
IR1 Extender
IR2 Blaster
Power
2
3
1
6
5
7
8
4
1
HDMI Out:
Connect to a HDMI equipped TV/monitor for display of
the HDMI input source signal.
2
LAN:
Connect to a PC or Laptop to the Internet or network
connection.
3
RS-232 Out:
Connect to the device that is to be controlled (via
D-Sub 9 pin female cable) by RS-232 commands.
4
Power LED:
This blue LED will illuminate when the device is
connected to a power supply.
5
IR 2 Blaster:
Connect to the supplied IR blaster cable for IR signal
transmission. Place the IR blaster in direct line of sight of the
equipment to be controlled.
6
IR 1 Extender:
Connect to the supplied IR receiver cables for IR
signal reception. Ensure that remote being used is within the direct
line-of-sight of the IR extender.
7
Link LED:
The yellow LED will illuminate when both the input and
output signals are connected.
8
CAT5e/6 In:
Connect to the transmitter unit with a Single CAT5e/6
cable for tranmission of all data signals.
