IR Control:
• Are the IR (TX) emitter/blasters and IR (TX) receivers correctly positioned to allow infrared
signals to be transmitted and received? Emitters should be fixed firmly over infrared sensors
of sources. Receivers should be attached to displays ensuring a clear line of sight to the remote
control used to operate.
• Is your remote control powered and sending a signal? As IR is invisi
ble to the naked eye, check
your remote is transmitting a signal by viewing the remote handset sensor througha digital
camera/camera phone. The sensor should flash when a button on the handset is held down.
• IR signal dropout can be experienced due to exterior emissions of infrared radiation. Ensure
emitters and receivers are away from direct sunlight. Halogen lighting and plasma screens may
also interfere with IR signals.
17. PhD Solutions Product Warranty
IMPORTANT INFORMATION ABOUT YOUR RIGHTS AND OBLIGATIONS, AS WELL AS
LIMITATIONS AND EXCLUSIONS THAT MAY APPLY TO YOU. YOUR RIGHTS AND THIS
LIMITED WARRANTY
This Limited Warranty gives you specific legal rights. You may also have other legal rights that
vary by state, provi
nce or jurisdiction. The disclaimers, exclusions, and limitations
of liability under
this Limited Warranty will not apply to the extent prohibited by applicable law. For a full description
of your legal rights you should refer to the laws applicable in your jurisdiction and you may wish
to contact a relevant consumer advisory service. Should you feel your product does not function
adequately due to defects in materials or workmanship, PhD Solutions (hereby referred to as
“the warrantor”) will, for the length of the period indicated below:
Repair the product with new or refurbished parts
,
or replace it with a new or refurbished product.
1. WHAT THIS LI
MITED WARRANTY COVERS; PERIOD OF COVERAGE
PHD Solutions (“PHD
Solutions”), 5th Floor, Barkly Wharf, Le Caudan Waterfront, Port Louis, Mauritius, warrants to
the owner of the enclosed product that the product contained in this box (“Product”) will be free
from defects in materials and workmanship for a period of two years from the date of delivery
following the original purchas
e (the “Warranty Period”), o
r if this product has been professionally
22
www.phdsolutions.co
MXC-4K862-HDTL-KIT
USER MANUAL