Phason Supra Touch Series, Руководство пользователя

Страница: 50 / 98

Phason 50 / 98 34740001
To program variable stages for heating
1. Press the
Menu
and then
Settings
.
2. Press
Heating
.
3. Press
Variable Stages
4. Press stage you want to program.
5. Press the
Up
or
Down
arrows to adjust the settings.
6. Press
Save
when you are finished.
Programming inlet actuators
Before programming the inlet actuator relays, make sure you have properly configured the relays and
calibrated the actuators. For more information, read
Configuring relays for inlet actuators or curtains
on
page 32 and
Calibrating inlet actuators
on page 33.
How inlets work

When the temperature is below the minimum set point, the inlet is closed.

When the temperature rises to the minimum set point, the inlet moves to the minimum position.

As the temperature rises, the inlet moves through the stages until it reaches its maximum open position.
This method lets you gradually open inlets instead of fully opening them when the temperature rises
above a single set point.