PhaseOne iX Controller MK4, Руководство по установке

Страница: 11 / 13

6. Using the iX Controller
Activating Cameras
To activate cameras connected to the iX Controller:
1. Securely connect the camera power cables to all
cameras.
2. Push in the camera circuit breaker. The
camera power indicator light is illuminated.
Deactivating Cameras
To deactivate cameras connected to the iX Controller:
1. P ull out the camera circuit breaker. The power is cut to the
cameras.
The green ca
mera power indicator light turns off.
Starting iX Capture
1.
Power up the iX Controller, see “
Powering up the iX Controller
”
for full instructions.
2. Double-click the iX Capture icon on the desktop window. The iX
Capture application displays.
3. Follow instructions for setup and use of iX Capture. See the iX
Capture user guide on the USB drive provided with the iX
Controller and in the downloads section of
https://industrial.phaseone.com/Downloads.aspx
Power Lanes
The iX Controller has two lanes of power ports:
•
One lane of 3-ports for Cameras (1)
•
One lane of 3-ports for Accessories (2)
•
The Camera power circuit breaker controls all power to the Camera
power ports and to the Accessories power ports. (3)
In addition, power to the Controller
’s power lanes
can be controlled
from iX Capture.
To control power to the power ports from iX Capture:
4. Go to System | Settings.
5. Check
the “Camera Power”
checkbox to control the Camera
power ports from iX Capture.
6.
Check the “Accessories Power” checkbox to control the
Accessories power ports from iX Capture (see iX Capture User
Guide).
Note : Accessories power ports can be used for Cameras. The accessory
terminology is mainly for PAS
1 2
3