Phase IW200 Скачать руководство пользователя

Страница: 5 / 6

[SPECIFICATIONS]

WOOFER

NOMINAL IMPEDANCE

FREQUENCY RESPONSE

RECOMMENDED POWER

EXTERNAL DIMENSIONS

SPEAKER DIMENSIONS

MOUNTING

WEIGHT

GRILLE

ACCESSORIES

(2) 8” Mica-Graphite Polypropylene w/ NBR Surround

4Ω

25 Hz - 160 kHz

350 W Peak

72” H x 14.4” x 3.4” D

20.5” H x 8.75” W

Enclosure mounts between 16” on-center 2” x 4” studded wall

40 lbs. in enclosure

Paintable White Perforated Powder-Coated Galvanized Steel

P350 Amplifier required (sold separately)

IW200 Active Subwoofer

STEP 7:

You are now ready to install the speaker baffle into the mounting flange. An Euro-connector is supplied on the crossover board. This is a two-

piece connector intended to make installation easier. Unplug the male portion of the connector from the circuit board. Insert the positive and negative

conductors of your speaker wire into the screw terminal using care to properly connect the + & - leads correctly. Using a small flat blade screwdriver,

tighten the screws in the connector to secure the wire.

STEP 8:

When mounting the speaker baffle into the flange, pay particular attention to insure the speaker is mounted right side up. The rear panel of the

baffle is marked for correct installation. Optimum performance may only be achieved when the speaker is mounted correctly. Plug the connector into the

crossover observing the correct polarity then install the baffle into the flange assembly. Six screws are supplied to secure the baffle to the flange. Hold

the baffle in position until you have at least two screws properly secured.

STEP 9:

Insert the grille assembly by applying light pressure at each corner of the grill until flush with the flange assembly. A paint shield is supplied with

each grille to protect the drivers in the event the customer wants the grill and flange assembly painted to match the wall color. Once the paint has dried,

remove the grill and the paint shield and re-insert the grille.

NOTE:

A paper clip bent to have a small hook approximately 1/8” long makes a convenient tool

for removing grille without scratching the finish.

[CARING FOR YOUR PHASE TECHNOLOGY SPEAKER]

All Phase Technology speakers are finished with a high degree of craftsmanship in either hand polished paint or vinyl laminates. We recommend using a

lint-free rag with a small amount of glass cleaner to maintain the long-lasting beauty of the finish. Avoid products containing silicones, oils, oil derivatives,

or solvents. Use a damp cloth on enclosures finished in vinyl laminates.

[MAINTENANCE AND SERVICE]

Because of Phase Technology’s uncompromising quality control programs, it’s unlikely that your speakers will ever need service if connected and used

as outlined in this Owners’ Manual. In the unlikely event that a problem does occur, please contact your Phase Technology

dealer. Your dealer has the

necessary factory-authorized parts and trained technicians to quickly restore your speaker to its original performance specifications.

[WARRANTY]

LIMITED WARRANTY

Phase Technology warrants its loudspeakers to be free from defects in material and workmanship for a period of ten (10) years

for speaker product, limited lifetime for CI speakers, and three (3) years for the electronic components to the original purchaser. Purchase must be made

from an authorized Phase Technology dealer.

This warranty does not cover service or parts to repair damage caused by misuse, abuse, damage while in transit, alterations, unauthorized repairs, failure

to follow instructions, fire, flood or any other cause beyond the reasonable control of Phase Technology. Defects in speaker cabinets or grilles must be

brought to the attention of your dealer immediately after purchase. This warranty will be void if the products’ serial number has been altered or removed.

Should your Phase Technology product require service, please call the MSE Audio customer service department for a return authorization. All merchandise

returned to Phase Technology without prior authorization will be refused. For your return authorization number, please call 855.663.5600 or email sales@

mseaudio.com.

“Speakers for your Life” is a trademark of MSE Audio, Overland Park, Kansas USA. Phase Technology is part of MSE Audio

. www.phasetech.com.