a 12 V DC trigger to the amplifier’s “POWER CONTROL IN” jack from your surround processor or your
automated control system to turn the amplifier on and off. There is also a “POWER CONTROL OUT”
jack available to pass on the control voltage to another component in your theater system. The following
tables show how each channel’s wiring is connected to the amplifier/controller’s input and output termi-
nals:
Connections From DP4000 to Surround Preamp/Receiver
DP Input
Number
XLR Balanced
Input Number
Preamp Output Channels
1
1
Left Front
2
2
Right Front
5
3
Center Channel
6
4
Subwoofer
9
5
Left Surround
10
6
Right Surround
13
7
Left Rear Surround in 7.1 System;
Rear Center in 6.1 System
14
8
Right Rear Surround in 7.1 System
Connections From DP4000 to System’s Speakers
DP4000 Output
Numbers (Channels 1-8)
Speaker Connections
1
Input 1: Left Front Woofer;
XLR Input 1: Left Front Speaker
2
Input 2: Left Front Tweeter;
XLR Input 1: Left Front Speaker
3
Input 3: Right Front Woofer;
XLR Input 2: Right Front Speaker
4
Input 4: Right Front Tweeter
XLR Input 2: Right Front Speaker
5
Input 5: Center Channel Woofer;
XLR Input 5: Center Channel Speaker
Note: Not connected if using a 2-way center
channel speaker
6
Input 6: Center Channel Woofer/Midrange;
XLR Input 5: Center Channel Speaker
7
Input 7: Center Channel Tweeter;
XLR Input 5: Center Channel Speaker
8 (RCA “Sub Out 8” Jack)
Input 8: To Subwoofer;
XLR Input 6: Subwoofer
5
Содержание dARTS DP4000-IA
Страница 8: ...8...
