CI140: The CI140 has a nylon terminal block on the top end of the enclosure. Connect your speaker lead wire to the terminal
block and secure teh stripped ends of your speaker wire by tightening down the screw terminals, the red wire to the positive,
and the black to the negative.
STEP 7:
You are now ready to install the speaker baffle into the mounting flange. Carefully insert the speaker baffle into the
wall flange until it bottoms out against the flange. Six screws are supplied to secure the baffle to the flange. Hold the baffle in
position and start 1 screw each at the opposite corners of the baffle but leave loose. Start the other 4 screws through the baffle
into the frame. Now snug down all 6 screws being careful not to over tighten them.
STEP 8:
Place the magnetic grille over the flange assembly. This speaker grille may be painted as desired to match the wall
color. Most standard paints can be used and it is recommended that the paint be sprayed on using several light coats so the
perforated holes in the grille are not obstructed.
Caring for Your Phase Technology® Speaker
All Phase Technology speakers are finished with a high degree of craftsmanship in either hand polished paint or vinyl laminates.
We recommend using a lint-free rag with a small amount of glass cleaner to maintain the long-lasting beauty of the finish. Avoid
products containing silicones, oils, oil derivatives, or solvents. Use a damp cloth on enclosures finished in vinyl laminates.
Maintenance and Service
Because of Phase Technology’s uncompromising quality control programs, it’s unlikely that your speakers will ever need
service if connected and sued as outlined in this owner’s manual. In the unlikely event that a problem does occur, please
contact your Phase Technology dealer. Your dealer has the necessary factory-authorized parts and trained technicians to
quickly restore your speaker to its original performance specifications.
Warranty
Phase Technology warrants its loudspekaers to be free from defects in material and workmanship for a period of ten (10) years
for speaker product, limited lifetime for CI speakers, and three (3) years for the electronic components to the original purchaser.
Purchase must be made from an authorized Phase Technology dealer.
This warranty does not cover service or parts to repair damage caused by misuse, abuse, damage while in transit, alterations,
unauthorized repairs, failure to follow instructions, fire, flood, or any other cause beyond the reasonable control of Phase
Technology. Defects in speaker cabinets or grilles must be brought to the attention of your dealer immediately after purchase.
This warranty will be void if the products’ serial number has been altered or removed.
Should your Phase Technology product require service, please call the MSE Audio customer service department for a return
authorization. All merchandise returned to Phase Technology without prior authorization will be refused. For your return
authorization number, please call 913.663.5600 or email [email protected].
Phase Technology
®
by MSE Audio
®
| 10661 Rene St. | Lenexa, KS 66215
913-663-5600 or 855-663-5600 | www.phasetech.com
