[GETTING STARTED AND PRECAUTIONARY NOTES]
For proper connection and therefore full enjoyment of your new Phase Technology speakers, we encourage you to read this owners’ manual thoroughly,
even if you are very familiar with installing speakers.
Speaker placement is very subjective. When deciding upon a location, consider the following:
Make certain your speaker wires can be run to or are accessible from these locations. Make certain the wall material is sturdy enough to support the weight
and vibration of the speakers. Make certain the area behind the speaker is free of obstacles such as wallstuds, electrical wiring, pipes, etc. Each speaker
should be positioned properly, relative to the listening area for good coverage.
[CARING FOR YOUR PHASE TECHNOLOGY SPEAKER]
All Phase Technology speakers are finished with a high degree of craftsmanship in either hand polished paint or vinyl laminates. We recommend using a
lint-free rag with a small amount of glass cleaner to maintain the long-lasting beauty of the finish. Avoid products containing silicones, oils, oil derivatives,
or solvents. Enclosures finished in vinyl laminates may be cleaned with a damp cloth as necessary.
[MAINTENANCE AND SERVICE]
Because of Phase Technology’s uncompromising quality control programs, it’s unlikely that your speakers will ever need service if connected and used
as outlined in this Owners’ Manual. In the unlikely event that a problem does occur, please contact your Phase Technology dealer. Your dealer has the
necessary factory-authorized parts and trained technicians to quickly restore your speaker to its original performance specifications.
[WARRANTY]
LIMITED WARRANTY
: Phase Technology warrants its loudspeakers to be free from defects in material and workmanship for a period of ten (10)
years for speaker product, limited lifetime for CI speakers, and three (3) years for the electronic components to the original purchaser. Purchase
must be made from an authorized Phase Technology dealer.
This warranty does not cover service or parts to repair damage caused by misuse, abuse, damage while in transit, alterations, unauthorized repairs,
failure to follow instructions, fire, flood or any other cause beyond the reasonable control of Phase Technology. Defects in speaker cabinets or
grilles must be brought to the attention of your dealer immediately after purchase. This warranty will be void if the products’ serial number has
been altered or removed.
Should your Phase Technology product require service, please call the MSE Audio customer service department for a return authorization.
All merchandise returned to Phase Technology without prior authorization will be refused. For your return authorization number, please call
855.663.5600 or email [email protected].
3
N/A
3” Polypropylene w/ NBR Surround
10 - 60 W
120 Hz-22 kHz
85 dB
8Ω
3 kHz
4.35” Diameter x 3.81” Depth (with mounting bracket)
1.4 lbs.
Paintable Powder-Coated Aluminum
Paintable White and Paintable Black
UL1480 Listed
Mounting Plate (AC-SPF15-MP)
SPF-15
Tweeter:
Woofer:
Recommended Power (RMS)
Frequency Response:
Sensitivity:
Impedance:
Crossover Frequency:
Dimensions:
Weight:
Grille:
Finish Options:
Certifications:
Optional Accessories:
Copyright © 2014 MS Electronics, LLC. All rights reserved. MSE Audio,
Phase Technology and PhaseTech are registered trademarks and
“Speakers for your Life” is a trademark of MSE Audio, Overland Park, Kansas
USA. Phase Technology is part of MSE Audio
®
. www.phasetech.com.
[SPECIFICATIONS]
