Mounting hardware kit includes the
following:
Part Quantity
Mounting Brackets
2
(shades up to 36” wide)
3
(shades 36” to 48” wide)
4
(shades 48” to 96” wide)
5
(shades 96” to 120” wide)
1-1/4” Screws
2
(shades up to 36” wide
)
3
(shades 36” to 48” wide)
4
(shades 48” to 96” wide)
5
(shades 96” to 120” wide)
3/4” Screws for
2
(shades up to 36” wide)
Outside Mount
3
(shades 36” to 48” wide)
4
(shades 48” to 96” wide)
5
(shades 96” to 120” wide)
Screws for
2 (1”)
Phillips head
Tension Device
2 (
3/8
”)
Phillips head per bracket
for Outside Mount
Wallboard or Plaster: use anchors specifically designed for hollow
walls (not included).
Concrete, Stone, Brick: use a masonry drill bit and anchors or
screws specifically designed for masonry (not included).
Tools Required:
Pencil, tape measure, level, screw driver,
scissors, step stool, drill, utility knife.
Installation:
For Outside Mounting
One bracket should be positioned about
2” to 6” from each end of the head rail.
For wider shades that require 3 or more
brackets, these should be spaced evenly
between the two outermost brackets.
Hold the shade in place and mark the
desired bracket locations with a pencil.
The brackets must be level – use a Spirit
Level if necessary to assure proper
alignment.
Attach the brackets to the wall or window
frame first. Pre-drill the mounting holes
using a 5/64” drill bit, and then screw the
brackets in place.
Place the head rail against the brackets
as illustrated – center the shade over the
window opening – then mark the location
of each mounting hole on the head rail.
Pierce the fabric at the hole locations
using the tip of a screw, then pre-drill the
mounting holes using a
5/64
” drill bit. Attach
the shade to the brackets using the
3/4
”
screws provided.
For Inside Mounting:
Mounting holes are pre-drilled in the
Head Rail. Screw the 1-1/4” screws into
the head rail until the tips of the screws
extend very slightly beyond the top of the
head rail. Align the front of the shade with
4. Costs associated with:
• Product removal • Transportation to and from the retailer • Brand label removal • Product
re-measure
• Product reinstallation • Shipping
• Incidental or consequential damages
In the event there are multiple blinds/shades in the same room, only the defective blind/shade
will be replaced
To Report Shipping Damage:
If damage occurred during shipping, call the place of purchase and report within 7 calendar
days, or you may be denied credit for your damaged product.
To Obtain Service:
If you suspect this product has a manufacturing defect in materials or workmanship:
• Locate the sales receipt
• Call place of purchase
Any unauthorized returns will not be accepted.
Warranty Remedy:
This shall be your sole remedy under this limited warranty.
If this product is found to have a manufacturing defect in materials or workmanship, we
will, at our discretion, do one of the following:
• Repair the product
• Replace the product
• Refund the cost of the product
Colors may vary from lot to lot and may not exactly match sample swatches or previous
purchases.
Discontinued items or color selections will be replaced with the closest equivalent current
product.
Your rights under state law:
This lifetime limited warranty gives you specific legal rights, and
you may have other rights which vary from state to state. Some states do not allow limitations
on how long a warranty lasts, so the above limitations may not apply to you. No agent,
representative, dealer or unauthorized employee has the authority to increase or alter the
obligation of this warranty. This lifetime limited warranty supersedes any previous versions.
For all questions,
please call (800) 264-1190
Hours of operation are
8:00am to 5:00pm CST
view from
behind the
shade
Part No.MEIN0214
Rev. 2
Installation Instructions Roman Shades
with Continuous Chain Operation
ENG
