10
Recording in the archive
(starting point)
The screen below shows how the display will appear when in the archive mode. As shown, the tester is
in archive no.2. If this is acceptable, you should press the
Ð
button to proceed to measurement mode
and begin testing. The results will be displayed in archive no.2 . Example: if the unit is showing archive
no. 2 and you wish to start your archive in another location such as No. 26, you would press the
Î
button to change the archive location by increasing numbers.
Î
Once you have selected your archive starting point, you need to press the
Ð
button to bring you to the
Measurement mode. At this point, you may begin taking tests.
Recording measurements in the archive
(after choosing starting point)
•
recording the measured hardness value (58.1) or mean value into
the archive is done by pushing the
Î
button. In doing so, the number of the archive cell for
measurement recording (measure N
o
01) will be automatically increased by 1 (measure N
o
2).
•
it is recommended to set ‘00’ in the current measurement number for every new set of
measurements.
