phase II+ 221 Series, Инструкция по эксплуатации и каталог запасных частей, Страница: 2 / 24

Operating Instructions & Parts Manual
Horizontal & Vertical Rotary Tables
Dividing Plates
Pg. 2
Operating Instructions & Parts Manuals
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect
yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and or property damage!
Retain instructions for future reference.
Description
The dual position rotary tables are for indexing,
circular cutting, angle setting, boring and spot
facing operations. The meehanite cast iron table is
precision machined and is provided with a Morse
Taper center hole. The table is graduated with a
360
°
scale. A micro collar graduated to one minute
with a ten second accuracy vernier scale is
provided. Rotary table features include lock-down
handles and crank disengagement mechanism.
Worm gear and center hole taper are hardened
and ground. The dividing plates accessory allows
the operator to accurately divide the 360
°
rotation
of the clamping surface into divisions of 2 through
66, and all divisibles of 2, 3 and 5 from 67-132.
Unpacking
Check for shipping damage. If damage has occurred, a
claim must be filed with carrier immediately. Check for
completeness. Immediately report missing parts to
dealer. Carefully remove table from crate.
Important:
The tool has been coated with protective
coating. In order to ensure proper fit and operation the
coating must be removed, remove coating with mild
solvents such as mineral spirits and a soft cloth.
Nonflammable solvents are recommended. After
cleaning, cover all exposed surfaces with a light coating
of oil. Be sure to lubricate table as described in
"Maintenance"
Caution: Never use highly volatile solvents. Avoid
getting cleaning solution on paint, as it may tend to
deteriorate these finishes. Use soap and water on
painted components.
Specifications
Dividing Plates Accessory
Possible divisions of
One rotation: ................... 2 thru 66, and all
............................................... divisibles of 2, 3, and 5
............................................... from 67-132
Rotary Tables
Accuracy Maximum T.I.P.
Flatness of clamping surface .................... 0.0006”
Parallelism of clamping
Surface to base ............................................... 0.0008”
Squarness of clamping surface
to angle face ..................................................... 0.0004"
Squareness of clamping surface
to center slot ................................................... 0.0008"
Concentricity of center bore ..................... 0.0008"
Maximum spacing error:
6” & 8” ................................ 1 minute, 20 seconds
10”, 12” & 16” ................ 45 seconds
General Safety Information
1. Read and follow all operating instruction before
operating rotary table.
2. Understand and obey all safety instructions
supplied with mill or other machines on which the
rotary table is used.
3. Always secure rotary table to work surface or other
machine.
4. Always secure workpiece to rotary table clamping
surface if used.
5. Always secure face plate to rotary table clamping
surface if used.
6. Always secure rotary table clamping surface with
lock-down handles when possible.
7. Maintain and lubricate tool properly.
Installation
1. Mount rotary table securely to machine work
surface.
2. Use slots provided on table and be sure that table is
rigidly and safely secured.
3. Table can be mounted horizontally or vertically
with slots provided.
4.
Fill with any light duty oil
up to bottom of sight
glass only. Table is not sealed and may leak from
handle if overfilled.