19
Operating the Phantom
Infrared (IR) Gate Setup
1. Connect the Sensor to one of the plas-
tic clips that matches your gooseneck size.
The clip slides on as shown at right. Mount
that assembly to the gooseneck.
2. Plug the cable into the Phantom’s jack
and clip the cable neatly to the gooseneck
using the clips shown in Figure 2 on page
seven.
3. Once the sensor is plugged in the gate is activated. The
sensor will “read” the infrared signature of anyone standing
in front of the mic. As long as someone is within six feet of
the mic, the mic will be active which is indicated by the illu-
minated green LED.
GP
Continued on next page
TM
Содержание PMR-GP1
Страница 2: ...2 ...
Страница 7: ...7 Installing the Phantom FIGURE 1 FIGURE 2 Connecting IR Sensor cable ...
Страница 11: ...11 Below the table or podium Installing the Phantom IR sensor and cable To mixer FIGURE 4 GP TM ...
Страница 13: ...13 Handheld microphones Installing the Phantom HH FIGURE 5 IR sensor TM ...
