Phantom Tech DCM7005, Руководство пользователя

Страница: 18 / 25

18
To tune to a weak station:
Press / repeatedly until you find optimal
reception.
Tip
•
[STEREO] is default setting for tuner mode.
•
Under tuner mode, you can press
OK
repeatedly to toggle between [STEREO] and
[MONO]
, and the unit memorizes your setting
even if you turn off the unit or turn to other
sources.
Program radio stations
automatically
Note
•
You can program a maximum of 20 preset
radio stations.
1
In tuner mode, press and hold
PROGRAM
for 2 seconds to activate
automatic program mode.
»
[AUTO] (auto) is displayed and begins
to blink.
» The first programmed radio station is
broadcast automatically.
Program radio stations
manually
Note
•
You can program a maximum of 20 preset
radio stations.
1
Tune to a radio station.
2
Press
PROGRAM
to activate
programming.
6 Listen to FM
radio
Plug & Play Installation
when the unit turn to Radio mode, and No
radio stations are stored, [AUTO INSTALL -
PRESS PLAY, STOP CANCEL]
(to auto install,
press ; to cancel, press ) displays.
1
Press on the main unit to start
installation.
»
The unit automatically stores radio
stations with sufficient signal strength.
» When all the available radio stations
are stored, the first preset radio station
is broadcast automatically.
Toexit Plug and Play installation mode
2
press source keys or on the remote
control.
»
The system switches to the designated
source mode or standby mode.
Tune to FM radio stations
Warning
•
Ensure that you have connected and fully
extended the supplied FM antenna.
1
Press
RADIO
.
2
Press and hold / to search to a
radio station.
3
When the frequency starts to change,
release the button.
»
The FM tuner tunes to a station with
strong reception automatically.
4
Repeat steps 2-3 to tune to more
stations.
EN
DCM7005_12_UM_Book1_V4.0.indb 18 4/30/2014 10:22:35 AM