Charging
port
Water line
Instructions
1.
Power on/off button – switch speed
2.
Press the power button to turn it on, the speed indicator light will turn
green. Low speed is at 180rpm.
3.
Press the power button twice, the speed indicator turns red. High speed is
at 240rpm.
4.
Press the power button three times to turn it off, when in low speed mode,
press it for more than 3 seconds to turn it off.
5.
A battery indicator shows 100 when battery is full. It will turn off
automatically when power is too low. The charging port is on the back.
Velcro connector
Velcro brush has 4 velcro strips to stick
the sponge brush or chenille brush.
Velcro strips
Waterproof
The part above the rotation shaft was
designed to be submerged in water,
the part below rotation shaft can only
work under water for a short time.
