Phaesun GmbH
· Brühlweg 9 · 87700 Memmingen · Germany | T49 (8331) 990 42 0 · T49 (8331) 990 42 12 | [email protected] ·
www.phaesun.com
3
5
6
4
600109 • S. 2
Step 3
Strip the insulation off the
module cable. Carefully cut a
piece of the upper coating and
remove it,so two individual
wires appear.
Step 4
Strip 10 mm of the insulation.
Carefully cut the two wires and
remove the coating..
Step 5
Fix the blade receptacle on the
wires.
Step 6
Identify the contacts for the
solar module on the solar
charge controller. Lead the
positive wire into the positive
contact (+) and the negative
wire (marked in blue) in the
negative contact.
Connect solar module with solar charge controller
Charge controller
Module cable
Step 2
Please find the instructions for
connecting the battery in the
charge controller manual.
Connect battery with solar charge controller
Step 7
Connect the solar module with
the solar charge controller.
7
