9) Inputs two functions:
- mono signal: insert a jack in (L). Aux send can be used as for other channels. Note
however that the send level is lower on this channel than on the previous 3.
–
stereo signal: insert 2 jacks in L & R, inputs adapted for stereo signals (feedback or
other …)
What you should know
: in this use, sending the Aux effect to “PRE” is
inactive on channel L. Placing the selector on “POST” resolves this limitation. It should
also be noted that on this stereo input, the auxiliary send is weaker than on the other 3
mono inputs.
10) 3.5mm mono output jack of the auxiliary send. Output levels are controlled by the "5"
knobs. The output is suitable for the input levels of the guitar pedals or effects rack.
11) Mixed output attenuator "main level" (logarithmic curve)
12) STEREO 3.5mm jack mix output (summation of 4 inputs on 1 stereo output)
Note: I do not recommend the use of 3.5mm to 6.35mm adapter, the latter can bring a mechanical
overload on the STEREO jack socket.
Prefer a 3.5mm to 6.35mm cable of this type (depending on use):
or
