7
Memory
PGT R800 saves your settings to hold the user settings in case of turning the unit OFF.
Setup bands
Euro-X, X and Ku bands reception is switchable in the menu. K and Ka bands are always
turned ON. To enter the setup menu press and hold DIM and MUTE buttons in the
same time for t3 sec. 2, 3 and 4 LEDs will sign the status of different options as the
followings:
In factory settings both X (1. Euro-X: 9.9GHz and 2. Normal X: 10.525GHz) and Ku bands
are OFF.
-
LED 2: Euro-X band (9.9GHz)
Press DIM button to turn ON or OFF this option
-
LED 3: X band (10.525GHz)
Press MUTE button to turn ON or OFF this option
-
LED 4: Ku band (13.45GHz)
Press CITY button to turn ON or OFF this option
A single short beep voice will sign you if you turn ON an option, two double short beep
voices will sign you if you turn OFF an option. If an option is turned OFF its sign (2, 3, 4)
cannot be seen.
Test mode
We can study the different alerts of our unit with its test mode. In this mode all of
sounds and visible alerts can be experienced. To enter the test mode press and hold
CITY button for 3 sec. You can exit from test mode by pressing any button in the end
of test mode when all the LEDs are visible on display.
6. TROUBLESHOOTING
Problems with powering ON:
Check all connections. Did you connect your detector in the right way?
Check the fuse of cigarette lighter socket of your car.
There is some dirt in your cigarette lighter socket. Clean the socket with a soft cloth.
Accidental electronic problems with your car.
Make sure that your unit is turned ON.
Check the fuse of the detector.