Protecting Your Machine From Damage:
• Always install in a suitable location where vibrations to the unit are avoided.
• Check this unit matches the mains voltage and frequency before plugging it in to your mains socket.
• In the event that any object or liquid enters the machine switch off immediately, remove from mains and
consult a qualified engineer.
• Should you experience any malfunction or damage to the mains cable, disconnect from the mains supply
immediately and consult a qualified engineer.
• All parts should be replaced with genuine spare parts and carried out by a qualified engineer.
• Do not add liquids of any kind, especially flammable liquids to this machine or its intended fluid. Use only
water based fluid, specifically designed for effects machines.
• Use high quality water-based liquid, recommended by your dealer to reduce clogging.
• During operation ensure there is sufficient fluid in the tank. Operating without fluid will damage the pump.
• If your machine fails to work disconnect immediately, remove all liquid and return in original packing to
your dealer.
• Always drain the fluid and water tanks before transporting.
• Follow the cleaning and maintenance advice in this manual.
• If your machine fails to work, disconnect immediately, remove all liquid and return in original packing to
your dealer.
Danger of Injury or Burns:
• For operation by adults only, ensure installation is away from the reach of children.
• Never leave the machine running unattended.
• Avoid all contact with the heater.
• Never aim the nozzle directly at people.
• Use only in a well ventilated area & do not cover the machine vents. In order to guarantee adequate
ventilation, allow a free air space of at least 20cm around all sides of the machine.
• Effects fluids can cause irratation and injury, handle with care and keep out of the reach of children. Avoid
contact with the eyes and skin, if this occurs rinse with warm water. If ingested call a doctor immediately.
Before Use:
Before commencing setup check the machine has not been damaged in transit. In the event there is any
damage to the housing, cable or internal components contact your dealer immediately.
Specifications:
Code: PFX900SLED
Mains Supply: 240Vac 50Hz
Power: 900 Watts
Heat Up Time: 3 min
Dimensions: 330 x 200 x 230mm
Weight: 3.32kg
Features:
• 900 watt heater.
• Amber LEDs
• 1L Fluid Tank.
• Wired remote control.
• Wireless remote
• Hanging Bracket
