PFT ZARGOMAT pro Safety - Overview - Operation - Spare parts lists
Cleaning PFT ZARGOMAT pro
2019-02-14
25
20.2 Disassemble sprayer for cleaning
NOTE!
Remnants of the material that collect in the interior
part of the mortar hose and the spraying gun can
cause damage, increase in quantity and constrict
the cross-section.
Consequently, the mortar hoses
must be clean, so that it will be possible to begin
the next pumping operation in a fault-free manner
.
2
Fig. 9: Disassemble sprayer
1. Push the housing locking lever (1) upwards.
2. By turning the housing (2) in the direction oft he arrow, the
housing snaps into place.
4
2
5
3
Fig. 10: Sprayer
3. Screw the handle of the pistol with the base body (3) form the
housing (2).
4. Clean housing (2) with brush inside.
5. Remove and clean material hose (4).
6. Clean conical needle, o-ring and guide sleeve.
7. Grease conical needle, o-ring guide sleeve (5) after cleaning.
Note!
Keep ZARGOMAT pro clean
. Before all things clean
connections and threads of material residues.
1