Mixing pump RITMO L plus FC-230V Overview – Operation
Intended use of air compressor
2020-11-09
23
21.2 Safety devices of air compressor
WARNING!
Danger of death due to non-functioning safety
devices!
Safety devices provide the highest possible levels
of operational safety. Even if safety devices make
work processes more complicated, they must never
be disabled. Safety is only assured when the safety
devices are intact.
Therefore:
Check that the safety devices and functional
and correctly installed before starting work.
Never deactivate safety devices.
Do not block the access to safety devices such
as emergency stop push-buttons, pull cords, etc.
21.3 General setup of the air compressor
The air compressor corresponds to the national and international
safety regulations and can therefore also be used in damp rooms
or in the open air. Areas with as clean and dry air as possible
should be preferred. Make sure that the device can suck in the
air unimpeded. This applies in particular when an installation is
intended.
The air compressor must be set up so that no hazardous admixtures,
such as solvents, vapours, dusts or other harmful substances,
can be sucked in. Setup is only permitted in rooms in which
an explosive atmosphere is not expected to occur.
21.4 Hot surface on the air compressor
General information
WARNING!
Risk of injury due to hot surface!
Surface temperatures can reach up to 100°C
during operation of the compressor. It must
therefore be ensured that the device does not
come into contact with parts of the body during
use as well as for a period of time afterwards
appropriate to the degree of heating.