PFS F19-547, Руководство владельца и по безопасности

Страница: 7 / 9

SET-UP
STEP 1
Place your Littlefoot fire table on a flat, level
surface. Place propane tank in the EZGO tank
stabilizer (fig.1) at least 36” from table on a level
surface and ensure the propane hose does not
create a tripping hazard. Maintain the following
clearances to combustable materials:
All sides: 24 inches
Top: 80 inches measured from top of table.
Never place this appliance in a building,
garage, or enclosed area such as a tent or shed.
Keep clear of trees and shrubs. Keep the area
surrounding your fire table free from any flamma-
ble liquids or combustable
STEP 2
Remove and uncoil gas line from retaining peg
inside the table. Connect the black propane hose
to tank. Hand tighten the nut clockwise . DO NOT
use a wrench to tighten.
STEP 3
Leak Test (fig. 2)
Perfom a leak test at least once a year or
whenever the table is moved around. Perfom
leak test outdoors in a well ventilated environ-
ment. DO NOT use a lighted flame such as a
match to test for leaks. Use soapy water in a
spay bottle. Make sure the control knob is in
the off position. Connect the propane tank and
pressurize the system. Open windscreens and
spray soapy water on joints of the gas delivery
system and at tank connection. Blowing bub-
bles incidcates a leak is present. Stop leak by
tightening the loose joint.
Do not use fire table until the leak
is corrected.
figure 3.
AIRMIXER
THERMOCOUPLE
IGNITER
WIRE
figure 1.
figure 2.
Page 6.