Page 20
RISK IN UNUSUAL SITUATIONS Cont...
Decommissioning
Decommissioning may be required if the Rota-Loo is no longer needed, is to be relocated or if major
maintenance is required.
When decommissioning a Rota-Loo to minimise any health and safety risks the critical issue is to ensure
un-composted wastes are properly dealt with.
•
All bins can be removed - only bins that have been in the Rota-Loo for 10 months or more may be
emptied according to normal bin emptying procedures. All other bins are to be emptied to proper
septic waste handling facilities (septic pump out truck or similar).
•
The Rota-Loo can then be removed after disconnecting the waste chute and pipe connections. Re-fit
the door to contain any remnant waste inside. Or the Rota-Loo can be closed up and left till future
need.
• If work is to be done internally (replace turntable) the inside of the Rota-Loo should be washed out -
use hose and drain through drain point - and left to dry before removing the lid for maintenance.
• If relocating, ensure all wastes are removed and the inside of the Rota- Loo is dry before transport.
Removing the Lid from a RL2000 Maxi requires a person sitting on the turntable to hold the nuts securing the lid.
If this is to be attempted, the Rota-Loo must be left open and have a fan connected to ensure adequate clean air flow
for the person - knowledge of working in confined spaces is advisable. Replacing the whole unit may be cost effective
and is recommended. RL650 and RL950 Lids can be removed from outside the unit
ROTA-LOO WARRANTY
◊
We stand by our product and provide as much support as we can.
◊
The Rota-Loo and associated products are warranted against original factory imperfections in
materials and workmanship, according to the Warranty conditions attached.
◊
It is impor
tant that you read and comply with the Rota-Loo Installation Manual and Operation Manual.
Installing the Rota-Loo using poor workmanship and/or non-complying components or materials will
invalidate the Warranty. Operating the Rota-Loo improperly will also invalidate the Warranty.
◊
If you are unsure about any part of the installation, please contact your supplier. 99% of problems are
due to poor installations, stemming from a misunderstanding of how a Rota-Loo should be installed
and how it works.
◊
If you feel that you do not wish or are unable to maintain your Rota-Loo, again please contact your
authorised dealer, supplier or PFG Group Victoria Pty Ltd to discuss your options.
◊
PFG Group Victoria Pty Ltd will only consider return and repurchase of a composting toilet provided
it has not been used, damaged or marked and within 30 days for the date of the invoice. The original
freight, administration and handling costs would be deducted from the prepurchase price, calculated
as 10% of the invoice total.
◊
In the unlikely event of a breakdown, please contact your local supplier for advice and spare parts.
PFG Group Victoria Pty Ltd have Distributors in most States and depending on the locality, could
attend to repairs if necessary, providing C.O.D. payment was made for travel, time and labour.
