Pfeiffer Vacuum HILOBE 1002, Руководство по эксплуатации

Страница: 8 / 68

1.3.2 Pictographs
Pictographs used in the document indicate useful information.
Note
Tip
1.3.3 Stickers on the product
This section describes all the stickers on the product along with their meaning.
D-35641 Asslar
Mod .: HiLobe 1302
P/N .: PP V21 201
S/N .: 22036249
Made in Germany 2021/01
Oil: D1 0.65 l
S(N
2
): max. 1300 m
3
/h
n: max. 7500 1/min
Mass: 105 kg
Rating plate (example)
The rating plate for the vacuum pump is located on the front of
the vacuum pump drive.
D-35641 Asslar
Mod.: RC 5500
IP 54 Type 12
P/N PP 100 180
S/N 12345637
Input 3~ 380-480 V ± 10% 50/60 Hz 16 A
Output 3~ 400 V 12.0 A 0-400 Hz
Mass
24 kg
Made in Germany 2020/11
C US
TÜV Rheinland
Rating plate of the electronic drive unit
The rating plate is located on the switch box of the electronic
drive unit.
Supply connection
use only the original supply plug
3~/PE
Mains connection
This sticker on the underside of control cabinet indicates that
you must use the original power supply connector.
Operating instructions note
This sticker indicates that this operating instructions must be
read before performing any tasks.
Warning hot surface
This sticker warns of injuries caused by high temperatures as a
result of touching without protection during operation.
warranty seal
Warranty seal
The product is sealed ex-factory. Damaging or removing a war-
ranty seal results in loss of the warranty.
Oil can
The "Oil can" icon indicates the lubricant filler screws.
Tbl. 1: Stickers on the product
About this manual
8/68