Pfeiffer Vacuum HEPTA 630 P Скачать руководство пользователя | Manualshive

Страница: 13 / 62

background image

Risks during disposal

WARNING

Health hazard through poisoning from toxic contaminated components or devices

Toxic process media result in contamination of devices or parts of them. During maintenance work,
there is a risk to health from contact with these poisonous substances. Illegal disposal of toxic sub-
stances causes environmental damage.

► Take suitable safety precautions and prevent health hazards or environmental pollution by toxic

process media.

► Decontaminate affected parts before carrying out maintenance work.
► Wear protective equipment.

2.3 Safety precautions

Duty to provide information on potential dangers

The product holder or user is obliged to make all operating personnel aware of dangers
posed by this product.
Every person who is involved in the installation, operation or maintenance of the product
must read, understand and adhere to the safety-related parts of this document.

Infringement of conformity due to modifications to the product

The Declaration of Conformity from the manufacturer is no longer valid if the operator
changes the original product or installs additional equipment.

● Following the installation into a system, the operator is required to check and re-evalu-

ate the conformity of the overall system in the context of the relevant European Direc-
tives, before commissioning that system.

General safety precautions when handling the product

► Observe all applicable safety and accident prevention regulations.
► Check that all safety measures are observed at regular intervals.
► Do not expose body parts to the vacuum.
► Always ensure a secure connection to the earthed conductor (PE).
► Never disconnect plug connections during operation.
► Observe the above shutdown procedures.
► Keep lines and cables away from hot surfaces (> 70 °C).
► Never fill or operate the unit with cleaning agents or cleaning agent residues.
► Do not carry out your own conversions or modifications on the unit.
► Observe the unit protection class prior to installation or operation in other environments.
► Provide suitable touch protection, if the surface temperature exceeds 70 °C.

2.4 Limits of use of the product

Parameter

Hepta 630 P

Installation location

● Indoors, protected from dust deposits

● Outdoors, protected from direct weather influences

Installation altitude

max. 1000 m above sea level

Orientation

Horizontal

permissible angle of inclination

± 1°

Pumped medium intake temperature, max.

≤ 50 hPa: +200 °C
> 50 hPa: +70 °C

Ambient temperature

5 – 50 °C

Safety

13/62

«
...
11
12
13
14
15
...
»

Содержание HEPTA 630 P































































Отзывы:

Нет отзывов

Похожие инструкции для HEPTA 630 P

Бренд: Calpeda Страницы: 80

Бренд: Jacuzzi Страницы: 8

Бренд: Larius Страницы: 46

Бренд: GALAXY SPAS Страницы: 26

Бренд: WarmPool Страницы: 26

OmniSpense ELITE

Бренд: Wheaton Страницы: 34

Бренд: Drazice Страницы: 9

Бренд: Calpeda Страницы: 19

Бренд: samhydraulik Страницы: 9

Бренд: Trigano PISCINES Страницы: 13

Бренд: Lochinvar Страницы: 1

York YH9FYH12BAH-A-X

Бренд: Johnson Controls Страницы: 30

Бренд: Lutz Страницы: 16

Idex Godiva GP10/10

Бренд: HALE Страницы: 28

Бренд: Nakayama Страницы: 50

Бренд: Kelvinator Страницы: 16

KH 4256 AIR PUMP

Бренд: ULTIMATE SPEED Страницы: 72

Бренд: Surtek Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды