Pfeiffer Vacuum DUO 3 Скачать руководство пользователя | Manualshive

Страница: 11 / 62

background image

Risks during installation

DANGER

Danger to life from electric shock

Touching exposed and voltage-bearing elements causes an electric shock. Improper connection of
the mains supply leads to the risk of touchable live housing parts. There is a risk to life.

► Before the installation, check that the connection leads are voltage-free.
► Make sure that electrical installations are only carried out by qualified electricians.
► Provide adequate grounding for the device.
► After connection work, carry out an earthed conductor check.

WARNING

Danger of poisoning from toxic vapors

Igniting and heating synthetic operating fluid generates toxic vapors. Danger of poisoning if inhaled.

► Observe the application instructions and precautions.
► Do not allow tobacco products to come into contact with the operating fluid.

CAUTION

Danger of burns on hot surfaces

Depending on the operating and ambient conditions, the surface temperature of the vacuum pump
can increase to above 70 °C. If access to the vacuum pump is unrestricted, there is a danger of burns
due to contact with hot surfaces.

► Install suitable touch protection if the vacuum pump is accessible to untrained persons.
► Allow the vacuum pump to cool down before carrying out any work.
► Contact Pfeiffer Vacuum for suitable touch protection in system solutions.

Risks during operation

WARNING

Danger of poisoning due to toxic process media escaping from the exhaust pipe

During operation with no exhaust line, the vacuum pump allows exhaust gases and vapors to escape
freely into the air. There is a risk of injury and fatality due to poisoning in processes with toxic process
media.

► Observe the pertinent regulations for handling toxic process media.
► Safely purge toxic process media via an exhaust line.
► Use appropriate filter equipment to separate toxic process media.

WARNING

Danger of poisoning from toxic vapors

Igniting and heating synthetic operating fluid generates toxic vapors. Danger of poisoning if inhaled.

► Observe the application instructions and precautions.
► Do not allow tobacco products to come into contact with the operating fluid.

CAUTION

Risk of injury from entrapment of body parts

After a power failure or a standstill as a result of overheating, the motor restarts automatically. A risk
exists of minor injury to fingers and hands (e.g., hematoma), from direct contact with the vacuum
flange.

► Maintain sufficient distance to the vacuum flange during all work.
► Safely disconnect motor from the mains.
► Secure the motor against re-start.

Safety

11/62

«
...
9
10
11
12
13
...
»

Содержание DUO 3































































Отзывы:

Нет отзывов

Похожие инструкции для DUO 3

Бренд: XPOtool Страницы: 10

iSOLAR PDP Series

Бренд: ICON Страницы: 24

ZHHS-01-10K-R290-V5-M

Бренд: JBG HT Страницы: 32

Бренд: B+BTec Страницы: 20

Бренд: KISANKRAFT Страницы: 44

Бренд: German pool Страницы: 11

Бренд: P.Lindberg Страницы: 54

Бренд: Davey Страницы: 8

Бренд: Pfeiffer Vacuum Страницы: 60

Бренд: Grundfos Страницы: 20

Бренд: Danfoss Страницы: 72

Benzlers Roloid Gear Pump

Бренд: Radicon Страницы: 16

Бренд: Daikin Страницы: 56

Бренд: Waterite Страницы: 24

Бренд: SAMES KREMLIN Страницы: 50

Бренд: OBL Страницы: 36

EVOPLUS SMALL 60/180 M

Бренд: DAB Страницы: 260

Бренд: Cembre Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды