Infringement of conformity due to modifications to the product
The Declaration of Conformity from the manufacturer is no longer valid if the operator
changes the original product or installs additional equipment.
● Following the installation into a system, the operator is required to check and re-evalu-
ate the conformity of the overall system in the context of the relevant European Direc-
tives, before commissioning that system.
Only qualified personnel trained in safety regulations (EMC, electrical safety, chemical pollution) are au-
thorized to carry out the installation and maintenance described in this manual. Our service centers can
provide the necessary training.
► Do not expose any part of the human body to the vacuum.
► Follow the safety and accident prevention requirements.
► Regularly check compliance with all precautionary measures.
► Do not turn on the product if the cover is not in place (unless otherwise stated).
Safety
9/30
