Operating Instructions Quadro LED-HI
10/2020
Seite 1 / 6
086200011a
en
5. Commissioning
5.1 Safety information
DANGER
- Indicates an unusually high-level hazardous situation. Non-compliance with this warning may result
in serious irreversible injury or death.
WARNING
- Indicates an unusually high-level hazardous situation. Non-compliance with this warning may re-
sult in serious, irreversible or fatal injury.
CAUTION
- Indicates a hazardous situation. Non-compliance with this warning may result in minor or moder-
ate injury.
DANGER
- Danger to life due to electric shock
Voltage-carrying devices and exposed connection cables may cause electric shocks and serious
accidents.
➢
Only trained and authorized electricians may work on electrical connections.
➢
Disconnect all supply lines from mains before installation and secure them against reconnec-
tion. Always ensure absence of voltage.
➢
Wait for the discharge phase of 5 minutes for the electrical components. The device should
only be opened afterwards.
➢
The operating voltage must only be applied when the housing is firmly closed.
WARNING - Danger due to unauthorized use of the devices
Improper use may lead to serious accidents.
➢
Ensure that the connection cable is protected against pulling and twisting during installation.
The devices are only intended for fixed installation.
DANGER - Danger due to damage to the devices
Non-compliance with the information on the type plate can lead to serious accidents.
➢
Always observe the information on the type plate when installing and maintaining the de-
vices.
CAUTION - Risk of injury due to sharp edges or heated components
➢
Wear gloves during any installation, assembly or service/maintenance work.
➢
Perform wiring tasks at a distance from sharp edges, corners and internal components.
CAUTION - Impairment of vision
➢
Avoid constant, direct glances into the activated lights to prevent impairment of vision.
