Pfaff select 2.0 Скачать руководство пользователя

Страница: 32 / 44

4.0

1-2.5

3-5

0/1

3.0

1-2.5

3-5

0/1

2.0

1-2.5

–

3-5

0/1

4.0

3-5

3.0

3-5

2.0

–

3-5

Utility stitches and pr

actical sewing

Elastic stitch

Because of its high elasticity, this stitch can

be used for sewing elastic on swimwear,

skirts or lingerie.

• Mark elastic and fabric in quarters.

• Pin elastic to fabric at quarter

markings.

• Place fabric and elastic under sewing

foot.

• Stretch elastic to

t the fabric. Begin

sewing.

Note: When stretching elastic, make sure to

stretch from the front and back of the sewing

foot.

Stitch

Stabilizing edges

With the rolled hem foot you can hem

blouses, silk scarves and valances with

ease, without having to pre-iron the fabric

edges. The hemming prevents the edges

from fraying and a clean, durable edge is

the result.

• Fold the beginning of the fabric edge

over twice (approx. 2 mm)

• Lay the folded fabric edge underneath

the hemmer and sew a few stitches.

• Leave the needle in the fabric, raise

the presser foot and insert the fabric

into the rolled hem foot scroll.

• Lower the presser foot and guide the

fabric evenly into the rolled hem foot.

Take care that the fabric does not run

under the right half of the presser foot.

Tip: On silk, Bastiste and chiffon fabrics,

the roll hem is particularly attractive with a

zigzag stitch

Stitch

optio-

nal

Содержание select 2.0












































Результаты поиска

Содержание select 2.0

Отзывы:

Похожие инструкции для select 2.0

Бренды по названию

Популярные бренды

Pfaff select 2.0, Руководство пользователя

Результаты поиска

Содержание select 2.0

Отзывы:

Похожие инструкции для select 2.0

Бренды по названию

Популярные бренды