30
Care and maintenance
These maintenance intervals are calculated for the average running time of a
single shift operation. If the machine is operated more than this, shorter inter-
vals are recommended.
9
.02
Cleaning the machine
The cleaning cycle required for the machine depends on following factors:
Single or several shift operation
●
Amount of dust resulting from the workpiece
●
It is therefore only possible to stipulate the best possible cleaning instructions for each indi-
vidual case.
For all cleaning work the machine must be disconnected from the mains
by switching off the on/off switch or by removing the mains plug!
Danger of injury if the machine suddenly starts up .
To avoid breakdowns, the following cleaning
work is recommended for single shift ope-
ration:
Open post cover
●
1
, lift bow
2
and remo-
ve bobbin.
Clean the hook and hook compartment
●
daily, several times if in continuous use.
Insert bobbin, close bow
●
2
and close
post cover
1
.
Do not run the machine with
the post cap
1
open.
Danger of injury from rotating
hook!
Fig. 9 - 01
2
1
Clean the hook compartment ............................... Daily, several times if in continuous use
Check the oil level (hook oil tank) ................................... Daily, before starting the machine
Check/adjust the air pressure ......................................... Daily, before starting the machine
Clean the fi lter of the air fi lter/lubricator ........................................................... As required
9
Care and maintenance
9
.01
Servicing and maintenance intervals
Содержание POWERline 2595 BASIC
Страница 35: ...Note ...