Pfaff POWERline 2591 ME, Руководство по обслуживанию

Страница: 38 / 48

38
Adjustment
1
.08
Error Messages and Description
Error Description
E 1 System error
E 2 Sewing motor E002/BB/xxx
BB = 20: Deadman
02: Position forwards
03: Position in reverse
05: Position by shortest route
09: Write parameter
10: Speed
0A: Reset stitch counter
0B: Stop after xxx stitches
30: Timeout for increasing speed
31: Timeout from uncertain positioning
32: Timeout from deadman command
33: Timeout for deleting errors
34: Timeout for emergency stop
35: Timeout for writing parameters
36: Timeout for resetting stitch counter
37: Timeout for stop command after x stitches
38: Timeout for initialisation
39: Establishing contact when turned on
xxx = sewing motor control unit error byte (see Motor Errors)
E 3 Section
E 4 End of section
E 5 Pedal or half stitch button or single stitch button (on machine head)
activated when machine turned on
E 6 Communication error with the step motor processor
E 7 End of ramp
E 8 Needle drive end point not found
E 9 Needle drive mid-point not found
E 10 Step motor processor error
E 11 Step motor step frequency too high
E 12 Sewing displacement error
E 13 Docu-seam system error
E 14 Incorrect program number (larger than 99)
E 15 Incorrect section number
E 16 Memory full
E 17 Incorrect stitch length
E 18 Unused
E 19 External control interface
E 20 Incorrect control
E 21 Power supply unit overloaded (24V)
E 22 Mains voltage
E 23 Power supply 24V too low