manualshive.com logo in svg

Pfaff hobby 1142, Руководство пользователя, Страница: 49 / 56

Поделиться
Скачать
Pfaff hobby 1142 Скачать руководство пользователя страница 49

3:5

Maintenance and trouble-shooting

The cloth is not fed smoothly

The feed dog is packed with lint.

Page 3:2

The stitches are too 

À

 ne.

Page 1:13

The feed dog is not raised after ”drop feed” sewing.

Page 1:3

Loops on the seams

The needle thread tension is too loose.

Page 1:16

The machine does not sew or run

The machine is not plugged in.

Page 1:2

Thread has been caught in the hook race.

Page 3:2

The bobbin winder spindle is not returned to the left after 

bobbin winding. (Bobbin winding condition)

Page 1:6

The stitch density is not suitable for the fabric being sewn

Page 1:14

The machine is noisy

Thread has been caught in the hook race.

Page 3:2

Lint has built up in the hook race or bobbin holder.

Page 3:2

Buttonhole is not sewn neatly

The stitch density is not suitable for the fabric being sewn.

Page 2:13

Stabilizer is not used when sewing on the stretch fabrics.

Use stabilizer

Layer slippage

Foot pressure is not adjusted properly.

Page 1:3

Important notes

: Before changing presser feet and needle you must turn the main 

switch off. Do not attempt to sew without fabric under the presser foot.

When leaving the machine, even for only a short time, switch off the main switch. 

This is important if there are any children nearby.

Содержание hobby 1142

























































Отзывы:

Нет отзывов