Pfaff hobby 1022, Инструкция по эксплуатации, Страница: 24 / 72

Operating the machine
20
Changing the needle
Switch off the master switch (12).
To remove: Lower the presser foot and
set the needle to its highest point. Loosen
the
À xing screw (23) and pull the needle
downwards.
To insert: The Á at side A of the needle
must face to the rear. Lower the presser
foot and insert the needle, pushing it up
as far as it will go. Hold the needle and
tighten the
À xing screw (23) À rmly.
A
Setting the needle thread tension
Set the required amount of the needle
thread tension (3) using the markings on
the tension dial.
The normal setting for sewing is 4-5. For
embroidery and buttonhole sewing be-
tween 2 and 3. (See page 15)
Lowering the feed dog
For certain sewing work, such as sewing
on buttons, the feed dog (22) has to be
lowered. To do this, open the hook cover
(19) and move the metallic slide to the
right-hand position (B) by pushing it down-
wards and then to the right. To engage the
feed dog, push down the slide and lock it
into the left-hand position (A).
A
B