Pfaff EXPRESSION 2038 - Скачать руководство пользователя страница 58

5:2

Decorative sewing/Specialty techniques

Free-motion embroidery

These striking embroidery designs can easily be sewn with your 

expression.

Set your expression as for free-motion monograms.

Draw the outline of the embroideries on fabric where you want 

to stitch them.

Follow the instructions and tips for free-motion monograms to 

stitch your embroideries.

Automatic tapering

You can use both stitch No. 3 and stitch No. 11 for automatic 

tapering. If you would like to embroider the corners of a border, 

select zigzag stitch No. 11. Press the tie-off button   (36) three 

times. 

A dense zigzag stitch appears in the expression window and 

beside it the word “tapering” with an arrow pointing to the 

taper of the corner on the left. Start sewing the point.

Continue to sew to the length you desire, then press the reverse 

sewing button (33) while sewing. The taper will be sewn 

automatically at an angle of 45°.

When using tapering the machine shall, unless the needle down 

function is selected, stop with the needle in up-right position. If 

needle down is selected the machine stops at the taper and the 

needle remains in the fabric so that you can turn the fabric 90°.

Free-motion monograms

Use stitch 3 (adjust stitch width and stitch length) to create 

wonderful monogram initials of your own design. Transfer 

the initials with a fabric marker to the area to be embroidered. 

Attach the darning foot and bring it into the darning position. 

Lower the feed dog.

Place a tear-away stabilizer under your fabric. Then place a 

piece of water-soluble stabilizer on the right side of the fabric. 

Place the fabric in an embroidery hoop and use the zigzag 

stitch, in varying widths, to follow your traced lines. Do not 

forget to use the darning position.

Knot the threads on the back of your project and remove the 

stabilizers. The remaining water-soluble stabilizer will dissolve 

in water.

Содержание EXPRESSION 2038 -





































































Отзывы: