Pfaff expression 150 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 36

Pfaff expression 150 Скачать руководство пользователя страница 18

18 - Preparations

1

2

3

4

1

3 7 8

10 9

11

12

13

14

15

16 17

2

4

5
6

Buttons

Thread tension dial (1)

If needed, adjust the top thread tension using the

markings on the tension dial.

Needle up/down with indicator (2)

Press this button to move the needle up or down.

The set ting of the needle stop po si tion is changed

at the same time. When needle down is activated,

the indicator is lit, the needle will stop in the down

position.
You can also tap the foot control to raise or lower

the needle.

Speed control (3)

Press the speed button to reduce the sewing

speed by half. An icon on the graphic display will

indicate that your machine is set to half speed.

Press the speed button again to resume full speed.

Reverse (6) with indicator (4)

For permanent reverse, press the button
before starting to sew. The reverse indicator (4)
will be lit and the machine sews in reverse until
you press the button again to cancel.
If you press the reverse button while sewing, the

machine sews in reverse for as long as you keep the

button pressed. The reverse indicator is lit when

the reverse button is pressed.
Reverse is also used when sewing buttonholes,
programmed tie-off end and darning stitches to

step between the parts of the stitch.

Programmed tie-off indicator (5)

The programmed tie-off indicator is lit to indicate

that one or several tie-off options are activated. The

indicator stays lit until the tie-off options are no

longer in use.

Immediate tie-off (7)

Press the tie-off button while sewing and your

machine sews a few tie-off stitches and stops

automatically.

Graphic display (8)

The graphic display lets you view all your

selections and options. Stitches are shown in real

size.

Stitch width or stitch positioning (9)

Increase or decrease the stitch width using the +

and - buttons.
Press the alternatives button (11) to view the stitch

positioning for the selected stitch. Use the + and -

buttons to change the stitch position.

Stitch length or stitch density (10)

Increase or decrease the stitch length using the +

and - buttons.
Press the alternatives button (11) to view the

density setting for satin stitches. Use the + and

- buttons to change the density for the selected

stitch.

«
...
16
17
18
19
20
...
»

Содержание expression 150





































Отзывы:

Нет отзывов