
3:8
A
B
C
Sewing
Free-motion position (3.2)
When using the free-motion/darning foot, the presser
foot needs to be in the free-motion position.
'LVHQJDJHWKH,'7V\VWHPDQGORZHUWKHIHHG
dogs.
$WWDFKWKHIUHHPRWLRQGDUQLQJIRRWDQGVHOHFWD
stitch.
7RHQJDJHWKHIUHHPRWLRQSRVLWLRQPRYHWKH
SUHVVHUIRRWOLIWXSDQGSXVKWKHVZLWFK$RQWKH
underside of the lift, towards you until it snaps into
place. Release the lift and it will be set in the free-
motion position.
4. Test sew on a scrap piece of the fabric with the
batting or stabilizer you will use. If necessary,
increase thread tension for your desired result.
6WDUWWRVHZ
6. To disengage the position, push the lift slightly
XSZDUGVDQGWKHVZLWFK$DZD\IURP\RXXQWLOLW
snaps into place.
For 4.2:
6HHSDJHIRULQVWUXFWLRQVRQKRZWRIUHH
motion sew with the 4.2.
Buttonholes
7RVHZDEXWWRQKROHÀUVWDWWDFKWKHFRUUHFWIRRWWKHQ
VHOHFW\RXUEXWWRQKROH0DNHVXUHWKDWWKH,'7
system is disengaged. To ensure good results, start by
sewing a test sample on a scrap piece of the fabric with
the stabilizer you will use.
The direction of the stitches being sewn will be
indicated on the screen by an arrow next to the
buttonhole.
Sensormatic buttonhole
When you sew a buttonhole with the sensormatic
EXWWRQKROHIRRWDGMXVWWKHVOLWOHQJWKVRWKDW
it is slightly larger than the size of the button.
6QDSRQWKHVHQVRUPDWLFEXWWRQKROHIRRW$
3OXJWKHFRUGLQWRWKHVRFNHW%IRXQGWRWKHOHIW
DERYHWKHQHHGOHDUHD
8VHWKHUXOHURQWKHOLGWRPHDVXUH\RXUEXWWRQ6HW
the slit length using the left and right arrow buttons
on the wheel.
4. Make sure that the red arrow lines up with the
PDUNLQJRQWKHIRRW&
6WDUWVHZLQJE\SUHVVLQJWKHIRRWFRQWURO
6. The arrows on the graphic display will show when
each part of the buttonhole is sewn and in which
direction. The columns will be sewn in the same
direction.
7. The buttonhole will be completed automatically.
<RXFDQUHSHDWWKHEXWWRQKROHDVPDQ\WLPHVDV
you wish by pressing the foot control.
Содержание Espression line
