Pfaff creative sensation, Руководство пользователя, Страница: 134 / 164

9:4
6
F
G
E
5
7
Embr
oidery mode - stitch-out
Embroidery information (E, F, G)
The current stitch in the current color block is
shown next to the picture (E). The number after
the slash shows the total number of stitches in the
current color block.
The current stitch in the design or combination is
shown next to the picture (F). The number after
the slash shows the total number of stitches in the
design or combination.
An estimation of the embroidery time for the
current color block is shown next to the picture
(G). If Monochrome is activated, the estimated
remaining embroidery time for the whole
embroidery is displayed.
Current stitch (5)
Touch + to step forward and - to step backwards
stitch by stitch. Use the - icon to move backwards
a few steps if the needle thread breaks or runs
out. Touch and hold to move through the stitches
quickly. The crosshair will follow the stitches in the
embroidery À eld.
Go to stitch (6)
To move to a particular stitch in the design touch
the go to stitch icon. A pop-up will appear, where
you can enter the desired stitch number. Current
stitch will then move to that stitch number. If the
number entered is too large, current stitch will
move to the last stitch in the design(s).
Basting (7)
Basting enables you to secure your fabric to a
stabilizer placed under it. It is especially useful when
the fabric to be embroidered cannot be hooped.
Basting provides support for stretchy fabrics.
Touch the basting icon (7) to activate basting.
Long touch the icon to open a window to select to
add the basting stitch around the design area and/
or around the hoop area.
Select baste around design and the machine
will add a basting stitch around the design area,
outlining the area where the design will be placed
on the fabric. Select baste around hoop area to add a
basting stitch close to the inner edge of the hoop.
The baste stitches will be added as the
À rst separate
color block(s) at the beginning of the color list. You
can step stitch by stitch and step in and out of the
baste color block(s).
Note: Basting can only be enabled while on the À rst stitch
in the embroidery.