Pfaff creative sensation pro, Руководство пользователя, Страница: 36 / 166

2:14
F
B C
G H I J
A
E D
Pr
epar
ations
Soft Touch
™
Buttons and indicators
Reverse button (A)
)RUSHUPDQHQWUHYHUVHSUHVVWKHEXWWRQRQFHEHIRUH
VWDUWLQJWRVHZ7KHUHYHUVHLQGLFDWRU%ZLOOEHOLW
DQGWKHPDFKLQHVHZVLQUHYHUVHXQWLO\RXSUHVV
WKHEXWWRQDJDLQWRFDQFHO,I\RXSUHVVWKHUHYHUVH
EXWWRQZKLOHVHZLQJWKHPDFKLQHVHZVLQUHYHUVH
IRUDVORQJDV\RXNHHSWKHEXWWRQSUHVVHG7KH
UHYHUVHLQGLFDWRULVOLWZKHQWKHUHYHUVHEXWWRQLV
pressed.
5HYHUVHLVDOVRXVHGZKHQVHZLQJEXWWRQKROHV
SURJUDPPHGWLHRIIHQGGDUQLQJVWLWFKHVDQG
tapering stitches to step between the parts of the
stitch.
Reverse indicator (B)
7KHUHYHUVHLQGLFDWRUZLOOEHOLWZKHQSUHVVLQJWKH
UHYHUVHEXWWRQWRVHZLQUHYHUVH,WLVDOVROLWZKLOH
VHZLQJSHUPDQHQWUHYHUVH
Action indicator (C)
7KHDFWLRQLQGLFDWRULVOLWWRLQGLFDWHWKDWDQDFWLRQ
LVWREHGRQHIRUH[DPSOHSHUIRUPLQJWDSHULQJ7KH
icon stays lit until the action is done.
Presser foot up and extra lift toggle (D)
Raises the presser foot and needle to the up
position.
Press the button once more and the presser foot will
UDLVHWRH[WUDOLIW7KHIHHGGRJVZLOOEHORZHUHGWR
make it easier to get thick fabric under the presser
foot.
Presser foot down and pivot toggle (E)
/RZHUWKHSUHVVHUIRRWFRPSOHWHO\3UHVVWKHEXWWRQ
RQFHPRUHWRUDLVHWKHSUHVVHUIRRWWRSLYRWKHLJKW
7KHSUHVVHUIRRWLVORZHUHGDXWRPDWLFDOO\ZKHQ\RX
start sewing.
Start/stop (F)
Press this button to start or stop the machine
without using the foot control. Press the button once
to start and press it again to stop.
7RGLVDEOHWKHVWDUWVWRSEXWWRQLQVHZLQJPRGH
DQGRQO\XVHIRRWFRQWUROZKHQVHZLQJDFWLYDWH
VWDUWVWRSEXWWRQVDIHW\LQWKH6HWWLQJVPHQX
Thread snips (G)
Press to cut both needle and bobbin thread
immediately.
,ISUHVVLQJWKLVEXWWRQZKLOHVHZLQJWKHWKUHDGV
ZLOOEHFXWEHIRUHWKHQHHGOHPRYHVWRWKHVWDUW
position of the next stitch. Your machine ties off
the thread, cuts the needle and bobbin threads and
raises the presser foot and the needle.
7KHWKUHDGVQLSVIXQFWLRQFDQEHSURJUDPPHGVHH
FKDSWHU
Note: Threads are cut automatically when buttonholes
are sewn with the Sensormatic buttonhole foot.
The presser foot will not raise after thread snips if
Automatic presser foot lift has been deactivated in the
Settings menu.
Thread snips performed by the machine can be cancelled
in the Settings menu.
In embroidery mode the threads are cut and the presser
foot raised. The upper thread is only cut automatically at
WKHFRORUFKDQJH:KHQWKHGHVLJQLVÀQLVKHGERWKQHHGOH
and bobbin threads are cut automatically.